3G/UMTS

Synchronization clocks for 3G mobile networks

In 3G/UMTS networks, just as in most other network types, interconnected network elements interwork correctly only if the signals they exchange comply with given synchronization quality requirements. The synchronization quality of the signals is determined by the network elements’ equipment clocks. Equipment clocks control some of the important signal processing functions within the network element (e.g. multiplexing, switching), as well as the data rate (accuracy, stability) of outgoing traffic signals. There are different clock frequency accuracy and stability requirements for different network element types. In most cases frequency accuracy specifications are much tighter than what the equipment clock could deliver if it were free running. This means that most equipment clocks need to be synchronized or “locked” to an external and possibly remote high accuracy frequency reference clock.
Furthermore there are cases where accurate frequency is not enough, where all equipment clocks of a given type are required to tick in phase throughout the network. The issue of clock synchronization is how to distribute a common frequency reference and possibly a common phase reference of appropriate quality to all clocks in the network. Network operators must design an appropriate synchronization network which guarantees that all equipment clocks operate within the relevant frequency (and possibly phase) accuracy and stability specifications. Before discussing how synchronization (frequency and possibly phase) is distributed to the equipment clocks, it is necessary to understand the synchronization performance requirements. This is the subject of the next section.

OSA 5401 Syncplug

Our OSA 5401 Syncplug™ is a highly accurate and uniquely effi cient small form-factor pluggable (SFP) grandmaster clock and Global Navigation Satellite System (GNSS) receiver, with the smallest footprint and most compact design on the market. It brings precise IEEE 1588v2 Precision Time Protocol (PTP) frequency and phase synchronization as well as Synchronous Ethernet deeper into access networks, including radio access and small cell networks.

Read more »

OSA 5410 Series

Our OSA 5410 Series is a family of compact and cost-effective synchronization distribution and assurance devices that brings the power of Syncjack™ to any access network. The OSA 5410 Series offers unique flexibility by supporting delivery and assurance of synchronization utilizing Synchronous Ethernet and IEEE 1588v2 Precision Time Protocol (PTP). Thanks to its built-in Global Navigation Satellite System (GNSS) receiver and Grandmaster (GM) Clock capability, it can be used as a timing source for frequency, phase and time-of-day delivery, as well as a measurement reference for Syncjack™ tools.

Read more »

OSA 5420 Series

Our OSA 5420 series is a family of cost-effective, mid-scale synchronization distribution and assurance devices that bring the power of Syncjack™ to any network. Following a toolbox approach, the family members of the OSA 5420 series can be utilized in a variety of network synchronization applications, including IEEE 1588v2 Grandmaster, Boundary Clock, Slave Clock and Assisted Partial Timing Support (APTS).

Read more »

OSA 5335 PTP Grandmaster

Our OSA 5335 Modular PTP Grandmaster is a scalable and high-performance IEEE 1588v2 standard compliant Grandmaster Clock for the distribution of frequency, phase and time synchronization over packet-based network infrastructure including IP/MPLS, Carrier Ethernet, PON and DSL networks.

Read more »

OSA 5548C SSU

Our OSA 5548C Synchronization Supply Unit is a scalable synchronization solution rangingfrom 20 unprotected outputs up to 1,000 protected outputs by adding up to four expansion shelves to the core unit. Its ultra-compact footprint makes it ideal for telecom operators to provide scalable network synchronization in over-crowded exchanges.

Read more »

OSA 5548C TSG

Our OSA 5548C Timing Signal Generator (TSG) is a scalable synchronization solution ranging anywhere from 20 unprotected outputs up to a thousand protected outputs by adding up to four expansion shelves to the core unit. Its ultra-compact footprint makes it ideal for telecom operators to provide scalable network synchronization in over-crowded exchanges.

Read more »

FSP Network Manager and Sync Manager

Our FSP Network Manager is a user-friendly network management system that provides end-to-end configuration, management and surveillance of networks built from ADVA FSP and OSA network elements. The system offers reliable, secure and flexible access to any node on the network to ensure superior network availability and premium service levels. Service providers and enterprises use the FSP Network Manager to greatly simplify their Optical, Ethernet and synchronization network operations by streamlining the provisioning, monitoring and reporting processes in network operations.

Read more »

OSA 3230B Cesium Clock

The Oscilloquartz’s OSA 3230B Cesium Clock is specifically designed and produced with the latest technology to serve complex applications where an extremely accurate reference signal is needed in a minimum size. Read more »

SyncView Plus

SyncView™Plus is a comprehensive synchronization Management System that allows telecom operators to manage all Oscilloquartz synchronization elements from a single local RS-232 serial connection to one shelf up to hundreds of units from a single point via remote Ethernet connection.
Read more »

Oscilloquartz SA
Avenue des Pâquiers 1 ▪ 2072 Saint-Blaise ▪ Switzerland
Tél: +41 32 722 55 55 ▪ Fax: +41 32 722 55 56